Pressure grouting waterproofing is additionally ordinarily apprehend as chemical pressure grouting.We have mentioned before several ancient recent ways and fashionable advance ways. This a standard recent methodology however the materials used for waterproofing keeps on dynamic . New advance chemicals with numerous properties square measure simply on the market within the market nowadays.

Pressure grouting waterproofing in the main contains materials like polymer and Epoxy. These materials square measure injected into the cracks cause within the concrete block or concrete structures.

Pressure Grouting with CEBEX100 grout material at magnitude relation of 225gm/50kg cement/20lit of water to be superimposed up to flow in a position consistency. Thorough mix and grout with pressure grouting machine upto honey combs get stuffed, seal the nozzle with FOSROC RENDEROC PLUG to avoid mixture obtaining out.

The biggest advantage of this methodology is that it are often utilized in dry also as in wet surfaces. This waterproofing methodology is employed in numerous cases such as:

• Rooftop block structures like podiums and car parks.
• Joint of various pipes.
• Pipe junctions and manholes.
• Weeping hairline cracks.
• Lift shaft walls and floors.
• This methodology is additionally administrated on massive areas like reservoirs, dams, waste water treatment plants.

OUR PRESSURE GROUTING SERVICES PROCESS:

1. First, we’ll check and verify the case where pressure grouting is to be performed.
2. Next, we’ll establish the position of drilling holes to stabilize the muse.
3. One’s holes unit trained, concrete or chemical mixture is pumped up up with high into the holes with the help of very little pipes or directly.
4. The mixture is pumped up up through holes until it comes into contact with the prevailing foundation.
5.  Pumping is stopped once the muse comes into ancient position, and thus the holes unit crammed.

HOW PRESSURE GROUTING WATERPROOFING WORKS?

• The initial step in pressure grouting is to visualize the locations of the required holes to be trained which is able to best stabilize the inspiration.
• Once the required location for the holes has been determined, the drilling is finished.
• Concrete grout is then pumped-up into the holes at high until the concrete comes into contact with the prevailing foundation.
• Whereas the concrete is pumped-up into the trained holes, the hydraulic lifts maintain an honest surface.
• As quickly as a result of the void below the inspiration surface has been stuffed properly, the holes unit of measurement refilled.