FOSROC SURFACE TREATMENTS
Fosroc believes that concrete should be designed to last – our top quality protecting systems and repair materials will prolong the lifetime of a structure means beyond its original style life. each penny spent on rising concrete quality, protection and improvement pays off within the long run, reducing the requirement to smash and make
structures that might otherwise be saved.
All over the planet, you’ll notice Fosroc repair product square measure going sturdy decades once application. They’re laborious at add marine jetties, power stations, and natural process plants – if truth be told, in a number of the foremost difficult environments to be found.
Almost every business can have a requirement for surface treatment instrumentation. Among the industries who these days use surface treatment include the following; the automotive business, the construction industry, the instrumentation trade, the electrical trade, the medical trade, industrial instrumentation, industries exploitation
laboratory instrumentation, aerospace, different and several other industries.
| Product | Description | Typical Uses | Dosage/Coverage/Yield |
|---|---|---|---|
| Concure WB 5, 20 and 200 litre | Low viscosity wax emulsion, water based concrete curing compound. Complies to ASTM C 309-90. | For spraying on freshly cast concrete, or newly exposed concrete surfaces after removal of form work, to form a temporary membrane which will retain sufficient moisture for effective curing to take place. | 3-5 m2/litre |
| Concure LP90 20 and 200 litre | High efficiency polymeric resin based film forming curing agent. Concure LP90 give 90% or greater curing efficiency when tested as per BS 7542-1992. | As a spray applied membrane to retain moisture In concrete for effective curing. Suitable for all general concrete applications and of partcular benefit for large area concrete surfaces, such as airport runways, roads and bridge works. | 3-5 m2/litre |
| Concure 1315 5, 20 and 200 litre | Eco-friendly, acrylic resin based, clear curing compound, sealer and dust proofer.Complies to ASTM C1315 Type 1, class A | Provides a clear curing, sealing and dustproofi ng compound, which can be used in a wide range of applications: • High rise construction to eliminate water curing • Floors, warehouses, slabs and columns • Self-curing, primer system to subsequent coverings | 5-7 m2/litre |
| Reebol 5, 20 and 200 litre | Chemical mould release agent. | To provide quick,clean and easy stripping of moulds and formwork and ensure high quality fair faced and stain free concrete. | Reebol 20-60m2 litre* depending on porocity & texture of mould surface. |
| Reebol Emulsion Xtra 5, 20 and 200 litre | Concentrated and emulsified chemical mould release agent. | For easy stainfree removal of concrete moulds and formwork of all types, particularly where wooden formwork is used and demoulding and stripping times exceed 24 hrs. | 1 litre of Reebol emulsion Xtra when diluted with 6 litres of water will cover 80-180M2 depending upon the nature of the substrate. |
| Multipurpose Cleaning Agent & Rust Removers | |||
| Reebaklens 0.5, 1.5 and 20 litre | Hardened concrete remover, cleaning and etching agent. Also used as tile cleaning agent. | Removes hardened concrete from tools, machinery and equipment, suitable for etching of concrete floors and surfaces prior to application of resin or other surface coating. Also used as tile cleaning agent. | Refer datasheet |
| Reebaklens RR 0.5, 1 and 5 litre | Rust remover, cleaning and etching agent | Reebaklens RR is used as a rust remover from steel bars prior to encasing in concrete / microconcrete. It can also be used on ohter steel surfaces prior to coating with epoxy systems. | Approx. 2.0 - 2.5 m2/L |
